XPOWER 85L Commercial LGR Dehumidifier
Why Buy From Us
Most commercial dehumidifiers are either portable or powerful. The XPOWER XD-85LH is both. At $2,999 it pulls 41 litres per day at AHAM conditions (27°C, 60% RH) and pushes that up to 69 litres per day at saturation (32°C, 90% RH). For a unit this size, that's a serious extraction rate.
It runs on Low Grain Refrigerant (LGR) technology, which matters in restoration work because standard refrigerant dehumidifiers lose efficiency as humidity drops. LGR units keep working effectively at lower humidity levels — down to 20% RH — which is exactly where the final stages of a drying job live.
XPOWER XD-85LH LGR Dehumidifier — Built for Restoration and Industrial Drying
Auto-Purge Pump with 12.2m Drain Hose
The built-in pump automatically clears the tank when it fills. You set the drainage route once and the unit handles the rest. No manual emptying, no job stoppages. The 12.2m hose gives you enough reach to drain to a floor waste, sink, or outside without repositioning the unit.
Dual Intake Technology
The XD-85LH draws air from two intake points rather than one. This increases airflow through the refrigerant circuit and lifts overall extraction performance — particularly useful in tight spaces where single-intake units struggle to process enough air volume.
Digital Control Panel
The panel displays real-time humidity and running time. You can set a target humidity level and the unit will cycle to maintain it. Straightforward to use on-site without referring to a manual.
Portable Build, Stackable Storage
Two moulded carry handles, a mobility handle, and durable wheels make this easy to move between rooms or load onto a van. Units stack up to three high, which keeps storage tidy if you're running a fleet of them.
Washable Stainless Steel Filter
The filter rinses clean and goes back in. No replacement filter costs, and no excuse to skip maintenance.
Operating Range
Runs from 0.6°C to 40.6°C, which covers the full spread of Australian conditions — from cool-climate basements to hot Queensland summer jobs.
Specifications
| Spec | Detail |
|---|---|
| Extraction at AHAM (27°C / 60% RH) | 41 litres (85 pints) per day |
| Extraction at Saturation (32°C / 90% RH) | 69 litres (145 pints) per day |
| Minimum Relative Humidity | 20% RH |
| Operating Temperature Range | 0.6°C – 40.6°C |
| Drain Hose Length | 12.2m (40 ft) |
| Power Cord Length | 7.6m (25 ft) |
| Filter Type | Washable stainless steel |
| Stackable | Up to 3 units high |
Who It's For
The XD-85LH suits restoration contractors, facility managers, and hire companies that need a reliable LGR unit for water damage drying, construction moisture control, or ongoing industrial humidity management. If you only need a unit for light residential work or occasional use, a standard refrigerant dehumidifier will do the job at lower cost. This one earns its price on high-frequency commercial use.
Give us a call on 1300 404 226 if you have questions about sizing this unit to your job or building out a full drying setup.
Frequently Asked Questions
What is an LGR dehumidifier and why does it matter?
LGR stands for Low Grain Refrigerant. Standard dehumidifiers become significantly less effective once humidity drops below around 40% — they struggle to extract moisture at that point. LGR units pre-cool incoming air before it hits the refrigerant coils, allowing them to continue pulling moisture efficiently even at lower humidity levels. For flood restoration and drying applications where you need to get conditions below 40% RH to stop mould growth, LGR is the right technology.
How much water does the XPOWER 85L dehumidifier extract per day?
The XD-85LH extracts 41 litres per day at AHAM conditions (27°C, 60% RH) — the industry standard testing condition. In higher humidity environments common in active flood restoration, extraction rates climb to 69 litres per day at saturation (32°C, 90% RH). The 85L figure in the product name refers to the maximum capacity under saturated conditions, not typical operating conditions.
What size space can the XPOWER 85L dehumidifier handle?
The XD-85LH is a commercial unit suited to large spaces — typically used in flood-affected properties, commercial kitchens, warehouses, and large residential drying jobs. For precise coverage estimates matched to your job conditions, contact us on 1300 404 226 and we'll work through the numbers with you based on room volume, temperature, and starting humidity.
Can the XPOWER 85L dehumidifier run continuously?
Yes — it's designed for continuous commercial operation. The built-in auto-purge pump and 12.2m drain hose mean water drains automatically without manual intervention. This is standard practice in flood restoration and commercial drying applications where the unit may run unattended for days at a time.
Is the XPOWER 85L dehumidifier suitable for flood restoration?
Yes — flood and water damage restoration is its primary commercial application. The LGR technology, high extraction rate, and continuous drain capability make it the right tool for professional restorers needing to bring structural moisture levels down within the mould-growth window. It's also used in commercial kitchens, cool rooms, swimming pool facilities, and any high-humidity commercial environment.
What warranty does the XPOWER 85L dehumidifier come with?
The XD-85LH is backed by a manufacturer's warranty. For current warranty terms and spare parts availability, contact us on 1300 404 226 — we provide lifetime product support and can assist with sourcing replacement components if needed.
Related articles and links: