Need help choosing the right equipment? Call 1300 404 226
Need help choosing? Call 1300 404 226
Skip to content
Delfin DG 70 EXP Industrial Three Phase Vacuum Cleaner front view

Delfin DG 70 EXP Industrial Three Phase Vacuum Cleaner

SKU DG70EXP-001
$12,426.70
Filter

Notify me when back in stock

Enter your postcode for a freight cost

Keep dust and solids moving off the floor, shift after shift

The Delfin DG 70 EXP is a three phase industrial vacuum for plants that collect large volumes of dry dust and solids and cannot afford to stop for motor servicing. A 5.5 kW side channel blower, a 100 litre detachable tank and a 30,000 cm² star filter let one machine run through long production shifts with a minimum of emptying and filter attention.

What each feature does for your site

  • 5.5 kW side channel blower, rated for 24/7 duty — the blower is coupled directly to the impeller with no transmission, so there is no routine motor maintenance and the machine is available whenever the line is running.
  • Pressure relief valve fitted as standard — it limits overpressure and overheating in the blower, so the motor lasts longer when the filter loads up or the hose is blocked.
  • 3,600 mmH₂O maximum vacuum (3,000 continuous) and 530 m³/h airflow — strong suction is held at the nozzle, so heavy material and long hose runs are cleared in fewer passes.
  • 100 litre detachable tank on a wheeled steel chassis — the tank is emptied away from the machine, so you spend less time between collection cycles and move the full load to the disposal point without lifting the whole unit.
  • 30,000 cm² star polyester filter with manual filter shaker — a large filter area and an operator-triggered clean restore airflow, so suction stays consistent without stripping the machine down.
  • IP65 electrical protection — the electrics are sealed against dust ingress, so the machine keeps working in dusty production areas.
  • 72 dB(A) noise level — the side channel blower is quieter than a conventional motor at this power, so operators can work alongside it for a full shift.
  • Painted steel construction with ABS accessory holder — the build suits daily industrial use, so hoses and tools stay with the machine.

Technical specifications

  • Voltage: 400 V, 50 Hz, three phase
  • Power / current: 5.5 kW / 11.1 A
  • Electrical protection: IP65
  • Max vacuum: 3,600 mmH₂O (3,000 mmH₂O continuous)
  • Max airflow: 530 m³/h
  • Suction inlet: 80 mm
  • Tank capacity: 100 litres, detachable
  • Primary filter: star type, polyester, Class L (IEC 60335-2-69), 30,000 cm², 500 mm diameter
  • Air load on filter: 176 m³/m²/h
  • Filter cleaning: manual
  • Noise level: 72 dB(A) (EN ISO 3744)
  • Dimensions: 66 x 118 x 145 cm
  • Weight: 150 kg

Options to match your application

These can be added to suit the dust you are collecting. Ask us for pricing and compatibility.

  • H14 absolute (HEPA) filter, for 99.995% retention on fine dust
  • Cyclone for filter protection, to slow incoming material and extend filter life on heavy or high-volume loads
  • Earth grounding kit with cables, to reduce static build-up
  • Container lifting bracket and ring, for lifting the tank to a bin or skip

Who it suits

Production managers, maintenance teams and facility operators in metalworking, foundries, aluminium and PVC processing, cement, and building and construction who need a continuous duty vacuum for large volumes of dry material.

Frequently asked questions

What power supply does the DG 70 EXP need?

It runs on 400 V, 50 Hz three phase power. Check that your site has a three phase outlet at the right rating before ordering.

Can it run all day without servicing?

The side channel blower is rated for continuous 24 hour duty and needs no routine motor maintenance. The filter still needs to be shaken down regularly and the tank emptied.

What dust can it collect?

The standard machine carries a Class L filter, which suits general dust and solids. For fine or hazardous dust, ask us about the H14 absolute filter option or a Class M configuration.

Is it ATEX certified?

This standard DG 70 EXP is not ATEX certified. Delfin makes ATEX certified versions for combustible dust. Contact us if your site is a classified zone.

Can it pick up liquids?

This listing covers dust and solids. If you need to collect liquids as well, contact us and we will confirm the right Delfin model for the job.

How much does freight cost?

At 150 kg this machine ships as freight. Send us your delivery postcode and we will quote freight to your site.

Description

Keep dust and solids moving off the floor, shift after shift

The Delfin DG 70 EXP is a three phase industrial vacuum for plants that collect large volumes of dry dust and solids and cannot afford to stop for motor servicing. A 5.5 kW side channel blower, a 100 litre detachable tank and a 30,000 cm² star filter let one machine run through long production shifts with a minimum of emptying and filter attention.

What each feature does for your site

  • 5.5 kW side channel blower, rated for 24/7 duty — the blower is coupled directly to the impeller with no transmission, so there is no routine motor maintenance and the machine is available whenever the line is running.
  • Pressure relief valve fitted as standard — it limits overpressure and overheating in the blower, so the motor lasts longer when the filter loads up or the hose is blocked.
  • 3,600 mmH₂O maximum vacuum (3,000 continuous) and 530 m³/h airflow — strong suction is held at the nozzle, so heavy material and long hose runs are cleared in fewer passes.
  • 100 litre detachable tank on a wheeled steel chassis — the tank is emptied away from the machine, so you spend less time between collection cycles and move the full load to the disposal point without lifting the whole unit.
  • 30,000 cm² star polyester filter with manual filter shaker — a large filter area and an operator-triggered clean restore airflow, so suction stays consistent without stripping the machine down.
  • IP65 electrical protection — the electrics are sealed against dust ingress, so the machine keeps working in dusty production areas.
  • 72 dB(A) noise level — the side channel blower is quieter than a conventional motor at this power, so operators can work alongside it for a full shift.
  • Painted steel construction with ABS accessory holder — the build suits daily industrial use, so hoses and tools stay with the machine.

Technical specifications

  • Voltage: 400 V, 50 Hz, three phase
  • Power / current: 5.5 kW / 11.1 A
  • Electrical protection: IP65
  • Max vacuum: 3,600 mmH₂O (3,000 mmH₂O continuous)
  • Max airflow: 530 m³/h
  • Suction inlet: 80 mm
  • Tank capacity: 100 litres, detachable
  • Primary filter: star type, polyester, Class L (IEC 60335-2-69), 30,000 cm², 500 mm diameter
  • Air load on filter: 176 m³/m²/h
  • Filter cleaning: manual
  • Noise level: 72 dB(A) (EN ISO 3744)
  • Dimensions: 66 x 118 x 145 cm
  • Weight: 150 kg

Options to match your application

These can be added to suit the dust you are collecting. Ask us for pricing and compatibility.

  • H14 absolute (HEPA) filter, for 99.995% retention on fine dust
  • Cyclone for filter protection, to slow incoming material and extend filter life on heavy or high-volume loads
  • Earth grounding kit with cables, to reduce static build-up
  • Container lifting bracket and ring, for lifting the tank to a bin or skip

Who it suits

Production managers, maintenance teams and facility operators in metalworking, foundries, aluminium and PVC processing, cement, and building and construction who need a continuous duty vacuum for large volumes of dry material.

Frequently asked questions

What power supply does the DG 70 EXP need?

It runs on 400 V, 50 Hz three phase power. Check that your site has a three phase outlet at the right rating before ordering.

Can it run all day without servicing?

The side channel blower is rated for continuous 24 hour duty and needs no routine motor maintenance. The filter still needs to be shaken down regularly and the tank emptied.

What dust can it collect?

The standard machine carries a Class L filter, which suits general dust and solids. For fine or hazardous dust, ask us about the H14 absolute filter option or a Class M configuration.

Is it ATEX certified?

This standard DG 70 EXP is not ATEX certified. Delfin makes ATEX certified versions for combustible dust. Contact us if your site is a classified zone.

Can it pick up liquids?

This listing covers dust and solids. If you need to collect liquids as well, contact us and we will confirm the right Delfin model for the job.

How much does freight cost?

At 150 kg this machine ships as freight. Send us your delivery postcode and we will quote freight to your site.

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.

STORE FAQs

Shipping prices can be viewed on each individual product page using our shipping quote calculator otherwise at checkout. 

We accept returns within 30 days of purchase for unused items in original packaging.

Yes, we offer competitive pricing for bulk orders. Contact our team for a custom quote.

Yes. Save on delivery fee and get in touch with our team to organise collection. 

Order processing times may vary based on a number of reasons. However, generally orders are processed within 2 - 4 business days. 

Shipping can vary due to the product purchased, the customers location and other factors. However you can expect your product to arrive within 2 - 10 days.

The majority of products have a minimum of 12 months warranty. This can change however from brand to brand. Get in touch with our team to find out more. 

As we stock a broad range of products and brands, servicing and repairs can also vary. Get in contact with our team to discuss further. 

Yes we do. If you need a spare or replacement part and don't see it on our site, get in touch with our team as we will most likely be able to source it for you.

Aussie Wide Shipping

Fast and competitive

Lifetime Support

Product lifetime support

Spare parts

We source spare parts

Buying in bulk?

Request a quote

Description

Keep dust and solids moving off the floor, shift after shift

The Delfin DG 70 EXP is a three phase industrial vacuum for plants that collect large volumes of dry dust and solids and cannot afford to stop for motor servicing. A 5.5 kW side channel blower, a 100 litre detachable tank and a 30,000 cm² star filter let one machine run through long production shifts with a minimum of emptying and filter attention.

What each feature does for your site

  • 5.5 kW side channel blower, rated for 24/7 duty — the blower is coupled directly to the impeller with no transmission, so there is no routine motor maintenance and the machine is available whenever the line is running.
  • Pressure relief valve fitted as standard — it limits overpressure and overheating in the blower, so the motor lasts longer when the filter loads up or the hose is blocked.
  • 3,600 mmH₂O maximum vacuum (3,000 continuous) and 530 m³/h airflow — strong suction is held at the nozzle, so heavy material and long hose runs are cleared in fewer passes.
  • 100 litre detachable tank on a wheeled steel chassis — the tank is emptied away from the machine, so you spend less time between collection cycles and move the full load to the disposal point without lifting the whole unit.
  • 30,000 cm² star polyester filter with manual filter shaker — a large filter area and an operator-triggered clean restore airflow, so suction stays consistent without stripping the machine down.
  • IP65 electrical protection — the electrics are sealed against dust ingress, so the machine keeps working in dusty production areas.
  • 72 dB(A) noise level — the side channel blower is quieter than a conventional motor at this power, so operators can work alongside it for a full shift.
  • Painted steel construction with ABS accessory holder — the build suits daily industrial use, so hoses and tools stay with the machine.

Technical specifications

  • Voltage: 400 V, 50 Hz, three phase
  • Power / current: 5.5 kW / 11.1 A
  • Electrical protection: IP65
  • Max vacuum: 3,600 mmH₂O (3,000 mmH₂O continuous)
  • Max airflow: 530 m³/h
  • Suction inlet: 80 mm
  • Tank capacity: 100 litres, detachable
  • Primary filter: star type, polyester, Class L (IEC 60335-2-69), 30,000 cm², 500 mm diameter
  • Air load on filter: 176 m³/m²/h
  • Filter cleaning: manual
  • Noise level: 72 dB(A) (EN ISO 3744)
  • Dimensions: 66 x 118 x 145 cm
  • Weight: 150 kg

Options to match your application

These can be added to suit the dust you are collecting. Ask us for pricing and compatibility.

  • H14 absolute (HEPA) filter, for 99.995% retention on fine dust
  • Cyclone for filter protection, to slow incoming material and extend filter life on heavy or high-volume loads
  • Earth grounding kit with cables, to reduce static build-up
  • Container lifting bracket and ring, for lifting the tank to a bin or skip

Who it suits

Production managers, maintenance teams and facility operators in metalworking, foundries, aluminium and PVC processing, cement, and building and construction who need a continuous duty vacuum for large volumes of dry material.

Frequently asked questions

What power supply does the DG 70 EXP need?

It runs on 400 V, 50 Hz three phase power. Check that your site has a three phase outlet at the right rating before ordering.

Can it run all day without servicing?

The side channel blower is rated for continuous 24 hour duty and needs no routine motor maintenance. The filter still needs to be shaken down regularly and the tank emptied.

What dust can it collect?

The standard machine carries a Class L filter, which suits general dust and solids. For fine or hazardous dust, ask us about the H14 absolute filter option or a Class M configuration.

Is it ATEX certified?

This standard DG 70 EXP is not ATEX certified. Delfin makes ATEX certified versions for combustible dust. Contact us if your site is a classified zone.

Can it pick up liquids?

This listing covers dust and solids. If you need to collect liquids as well, contact us and we will confirm the right Delfin model for the job.

How much does freight cost?

At 150 kg this machine ships as freight. Send us your delivery postcode and we will quote freight to your site.

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.