Need help choosing the right equipment? Call 1300 404 226
Need help choosing? Call 1300 404 226
Skip to content

Filters

Commercial Dehumidifiers

Excess moisture causes mould growth, musty odours, condensation and damage to building materials and stored equipment. For restoration contractors, property managers, aged care facilities and commercial operators in high-humidity spaces, a commercial dehumidifier is the tool that gets a space dry and keeps it dry.

We stock commercial LGR dehumidifiers from Thorair and XPOWER, from 50L-class units through to the XPOWER XD-85LH, with fast dispatch Australia-wide. Prices include GST. Not sure what you need for your space? Call 1300 404 226 with the room size and we'll help you size it.

Pick a Dehumidifier That Dries the Job the First Time

The right unit depends on how much water is in the building, how warm the space is and how long the job runs. The notes below cover how to choose between LGR and standard units, how to read the capacity ratings, and which model suits which job.

LGR vs Standard Commercial Dehumidifiers

Standard refrigerant dehumidifiers lose efficiency as the air gets drier, which is exactly when a drying job is nearly finished. Low Grain Refrigerant (LGR) units pre-cool the air so they keep extracting moisture at lower humidity levels. For flood recovery, structural drying and anywhere moisture has soaked into materials, LGR is the specification restorers work to. All four models in this range are LGR units.

How to Read the Capacity Ratings

The litres-per-day figures are not measured at the same conditions, so they can't be compared head to head. The XPOWER XD-85LH is rated at 41 litres per day at AHAM conditions (27°C, 60% RH) and 69 litres per day at saturation (32°C, 90% RH). The "85" in its name refers to 85 pints, not 85 litres. The Thorair units are rated at warmer, more humid test conditions: the 50L at 30°C and 80% RH, the 70L at 30°C and 90% RH, and the 90L at 105 litres per day at 26°C and 90% RH. If you're comparing models, ask us for the figures at your site conditions.

Which Model Suits Which Job

  • Thorair 50L ($1,499) — 300m³/h airflow, operates down to 2°C, continuous drain option, so a single room or basement dries unattended without tipping a tank.
  • Thorair 70L ($1,799) — Panasonic compressor, 300–550 CFM airflow, programmable timer and humidistat, so mid-size commercial spaces hold a set humidity without constant adjusting.
  • Thorair 90L ($1,990) — 600 CFM airflow, hose included, splash guard switch, so large rooms, warehouses and bigger restoration jobs get through the high-volume stage faster.
  • XPOWER XD-85LH ($2,999) — auto-purge pump with a 12.2m drain hose, stackable three high, 30.5kg, so contractors can move it between sites, run it for days without emptying it and store a fleet in less space.

Pairing Dehumidifiers With Air Movers

Air movers push moisture off wet surfaces and into the air, and the dehumidifier removes it. A common starting setup is one LGR dehumidifier for every two to three air movers, with the dehumidifier positioned away from walls and a drain hose connected for continuous drainage. Browse our commercial air movers to complete the setup.

Need a price on a dehumidifier or a full drying kit? Request a quote. Finance is available through Emu Money on products over $2,000, which includes the XPOWER XD-85LH, so see our finance options before you decide.

Frequently Asked Questions — Commercial Dehumidifiers

What size dehumidifier do I need for water damage restoration?

It depends on the room volume, the temperature and the starting humidity. A common guideline is one LGR dehumidifier for every two to three air movers. Call us on 1300 404 226 with your room dimensions and we'll work out the right model and how many units you need.

What is the difference between an LGR dehumidifier and a standard one?

LGR (Low Grain Refrigerant) units pre-cool the incoming air, so they keep extracting moisture efficiently at lower humidity levels. Standard refrigerant units slow down as the air dries. For structural drying, where the last stage is the hardest, LGR is the usual specification.

Why do the capacity ratings differ between models?

Manufacturers rate their machines at different test conditions. The XD-85LH is rated at AHAM conditions (27°C, 60% RH) and at saturation, while the Thorair units are rated at warmer and more humid conditions. Real extraction depends on your site, so call us and we'll compare models for your conditions.

Can these dehumidifiers run continuously?

Yes. The Thorair units support a continuous drain connection, and the XD-85LH has a built-in pump with a 12.2m drain hose, so extended jobs don't rely on emptying a tank. Check the unit, hose and drainage route regularly and operate it according to the manufacturer's instructions.

Is finance available on commercial dehumidifiers?

Finance is available through Emu Money on products over $2,000, which includes the XPOWER XD-85LH. See our finance page for how it works, or call 1300 404 226.

Aussie Wide Shipping

Fast and competitive

Lifetime Support

Product lifetime support

Spare Parts

We source spare parts

Buying in Bulk?

Request a quote