CALL US TODAY FOR BEST PRICES, FAST QUOTES AND GREAT DISCOUNTS: 1300 404 226
CALL FOR BEST PRICES: 1300 404 226
Skip to content

Filters

Xpower Cleaning and Restoration Equipment

XPOWER specialises in restoration and air quality equipment — air movers, dehumidifiers, air scrubbers, and HEPA filtration systems used by restoration contractors, cleaning professionals, and facilities teams across Australia. Their machines are built for the kind of continuous heavy use that restoration and remediation work demands. We stock the full XPOWER range at Oz Cleaning Gear with fast dispatch nationwide. Give us a call if you need help speccing the right combination of equipment for your job.

The XPOWER Range — Air Movers, Dehumidifiers, Air Scrubbers and More

XPOWER covers the full spectrum of restoration and air quality equipment. Fifteen products across six categories — every machine built for the kind of continuous use that restoration and remediation work demands. Whether you're drying a flood-damaged commercial space, running mould remediation, or managing ongoing air quality in a healthcare facility, there's a specific XPOWER product for each stage of the job.

XPOWER Air Movers

The largest product category in the XPOWER range and the foundation of any water damage drying setup. Five models covering different output levels and formats:

The P-230AT ($279) is the compact entry-level air mover — 175W, lightweight, suited to smaller drying jobs, spot drying, and as a supplementary unit alongside larger machines. The X-400 ($429) steps up to 350W multipurpose performance for standard commercial drying applications. The X-800C ($585) doubles the output again at 700W — the workhorse for larger commercial drying jobs where higher airflow across wet surfaces is needed. The PL-700A ($557) is the low-profile format — sits flat on the floor to direct airflow under carpet, beneath furniture, and along baseboards where standard upright units can't reach effectively. The X-47ATR Turbo-Pro ($679) is the high-output axial air mover at 225W with a turbo configuration delivering concentrated high-velocity airflow — suited to wall cavity work and targeted drying on structural materials.

For large water damage events, multiple air movers running in combination with a dehumidifier is standard practice. The rule of thumb is one air mover per 10–15m² of affected area.

XPOWER LGR Dehumidifiers

Two commercial LGR (Low Grain Refrigerant) dehumidifiers built for restoration contractor use. LGR technology extracts moisture more efficiently at lower humidity levels than standard refrigerant units — critical in the later stages of structural drying when ambient humidity has already dropped but structural moisture content is still elevated.

The 85L LGR Dehumidifier ($2,999) handles standard commercial water damage jobs — single floor plates, standard room sizes, and water damage events of moderate severity. The 165L LGR Dehumidifier ($4,999, currently draft) is for larger commercial and industrial drying applications where greater daily moisture extraction capacity is required. Give us a call to confirm availability on the 165L.

XPOWER Air Scrubbers

Two models for different scale applications. The X-3400 ($1,799) is the HEPA filtered air scrubber for mould remediation, construction environments, and any active restoration site where airborne particulates need to be captured continuously during work. Replacement HEPA filter (H35, $95) and carbon filter (CF35, $79) available separately — using genuine replacement filters maintains the filtration certification. The AP2000 ($3,750) is the high-volume commercial air scrubber for larger spaces — higher CFM output suited to large commercial remediation sites and ongoing air quality management in big facilities.

XPOWER Viking Pressurised Wall Cavity Dryer

The Viking ($999) solves the problem standard air movers can't — moisture trapped inside wall cavities, structural framing, and between building materials that surface drying alone won't reach. Small access holes are drilled into the wall cavity, the Viking injects pressurised high-velocity air directly into the cavity, and structural timber and insulation dry from the inside without requiring demolition. On any water damage job where cavity moisture is suspected, the Viking eliminates the mould risk that follows untreated structural moisture within days.

XPOWER Handheld Blower and ULV Cold Fogger

The Airrow Multipurpose Handheld Blower ($118) is a compact cordless blower for dust removal, drying in tight spaces, and general cleanup — a useful utility tool for restoration sites and cleaning operations. The F16B Battery Powered ULV Cold Fogger ($899) applies disinfectants, sanitisers, and mould treatments to large surface areas efficiently without requiring a power outlet — the cordless format is particularly practical in spaces where outlet access is limited during active remediation work.

Frequently Asked Questions — XPOWER Equipment Australia

What is XPOWER used for?

XPOWER equipment is used primarily in water damage restoration, mould remediation, and commercial air quality management. Air movers accelerate evaporation from wet surfaces. LGR dehumidifiers extract moisture from the air as it evaporates, driving structural drying. Air scrubbers capture airborne particulates during active remediation. The Viking wall cavity dryer dries structural cavities that surface equipment can't reach. The fogger applies disinfectants and mould treatments across large areas efficiently. Used in combination, these machines form a complete restoration workflow.

Which XPOWER air mover should I buy?

Match the model to the scale of your typical jobs and the specific drying requirement. The P-230AT at $279 suits small jobs, spot drying, and budget-conscious operators building a kit. The X-400 and X-800C are the mid-range workhorses for standard commercial drying jobs — the X-800C's higher output handles larger affected areas more efficiently. The PL-700A low-profile format is essential where carpet, underfloor, and baseboard drying is a regular requirement. The X-47ATR Turbo-Pro delivers concentrated high-velocity airflow for structural and cavity drying work. Most restoration contractors run a mix of models depending on the job.

What is an LGR dehumidifier and why does it matter for restoration?

LGR stands for Low Grain Refrigerant. Standard dehumidifiers work efficiently down to around 40–50% relative humidity, then lose performance as the air becomes drier. LGR dehumidifiers use a pre-cooling stage to extract moisture more effectively at lower humidity levels — continuing to pull meaningful water from the air even when ambient conditions have already dropped significantly. For structural drying, where the goal is to bring building materials down to an acceptable moisture content, LGR units complete the job faster and more thoroughly than standard units. Both XPOWER dehumidifiers in our range are LGR models.

How many air movers do I need for a water damage job?

The general industry guideline is one air mover per 10–15m² of affected floor area, paired with a dehumidifier sized to the total air volume of the space. In practice, the severity of saturation, the materials involved, and ambient temperature and humidity all affect the right setup. For a standard residential room, 3–4 air movers and an 85L dehumidifier is a common starting point. For larger commercial flood events, give us a call and we'll help you work through the equipment requirements before you commit to a purchase.

Is XPOWER available in Australia?

Yes — we stock XPOWER equipment at Oz Cleaning Gear with fast dispatch Australia-wide. The full range of air movers, dehumidifiers, air scrubbers, the Viking wall cavity dryer, fogger, and genuine replacement filters are all available here. Give us a call if you need help selecting the right combination of equipment for your restoration or air quality application.

 

Aussie Wide Shipping

Fast and competitive

Lifetime Support

Product lifetime support

Spare Parts

We source spare parts

Buying in Bulk?

Request a quote