Cleanstar Cutlass 30L Carpet Extraction Machine
Why Buy From Us
The Cleanstar Cutlass is a 30-litre carpet extraction machine built around two specifications that determine real-world extraction performance — motor power and pump pressure. The 1,500W two-stage motor delivers 3,000mm water lift and 50 litres per second airflow, extracting moisture from carpet pile and upholstery fabric quickly and leaving surfaces dry faster than lower-powered extractors. The 130 PSI bypass membrane pump drives cleaning solution into the carpet at 9 bar maximum pressure — enough to penetrate dense commercial pile and lift embedded contamination that surface-level cleaning leaves behind.
At 30 litres the tank sits in the practical mid-range for commercial extraction — large enough for extended cleaning sessions across hotel rooms, office floors, and commercial carpet areas without constant refilling, manageable enough to remain portable between jobs and sites. The 10-metre power cable and 5-metre hoses provide a working range that covers most commercial room configurations without repositioning the machine. At 24kg it's a wheeled unit rather than a carry machine — suited to sites where the extractor moves across floors rather than between floors.
The three-nozzle carpet wand with 300mm cleaning width covers carpet efficiently in open areas. The included 4-inch plastic upholstery tool handles fabric furniture, vehicle seating, and upholstered surfaces where the carpet wand is too wide to manoeuvre effectively.
Deeper Extraction, Faster Drying for Commercial Carpet Work
Key Features
- 1,500W two-stage motor, 3,000mm water lift — so more moisture is pulled out per pass, leaving carpet drier faster and cutting the time a room stays out of service
- 130 PSI bypass membrane pump, 9 bar maximum — so cleaning solution penetrates dense commercial pile and lifts embedded contamination that low-pressure extractors leave behind
- 50 L/s airflow — so extracted moisture clears from the carpet surface into the recovery tank quickly, keeping each pass efficient
- 30-litre solution and recovery tanks — so you can run extended commercial sessions without constant refilling, while the unit stays light enough to stay portable between jobs
- Three-nozzle carpet wand, 300mm cleaning width — so solution is distributed evenly across the full cleaning path for consistent coverage
- 4-inch upholstery tool included — so fabric furniture, vehicle interiors, and upholstered surfaces are covered without needing a second machine
- 10-metre power cable and 5-metre hoses — so the working range covers most commercial rooms without repositioning the machine mid-job
- 24kg wheeled frame — so the unit stays stable during operation and moves easily between areas on-site
Technical Specifications
- Solution Tank: 30L
- Recovery Tank: 30L
- Motor Power: 1,500W
- Motor Type: 2-stage, high water lift
- Max Water Lift: 3,000mm H₂O
- Max Airflow: 50 L/s
- Pump Type: Bypass membrane
- Pump Power: 80W
- Max Pump Pressure: 9 bar (130 PSI)
- Max Flow Rate: 4.5 L/min
- Cleaning Width: 300mm (3 nozzles)
- Power Cable: 10 metres
- Hose Length: 5 metres (solution and vacuum)
- Tank Material: High-density polyethylene
- Weight: 24kg
- Dimensions (W × L × H): 38 × 50 × 78cm
Included Accessories
- Three-nozzle carpet floor wand — 300mm cleaning width
- 4-inch plastic upholstery tool
- 5-metre GVAC dirty water hose
- 5-metre solution hose
- 10-metre power cable
Frequently Asked Questions
How is the Cutlass different from a portable spotter or smaller extractor?
The Cutlass is built for full-room commercial extraction rather than spot cleaning. The 30-litre tanks and 1,500W two-stage motor are sized for hotel rooms, offices, and larger carpeted areas, where a portable spotter's smaller tank would mean constant refilling.
How long does the 30-litre tank last during a job?
Run time depends on carpet condition and soil level, but the 30L capacity is sized to cover a full room or several smaller areas before a refill is needed, reducing interruptions during a shift.
Is the Cutlass suitable for water damage or flood restoration work?
The high water lift (3,000mm) and 50 L/s airflow are well suited to moisture extraction, making it a practical option for water-affected carpet as well as routine commercial cleaning.
What maintenance does the pump need?
As with any bypass membrane pump, running clean solution through the system and avoiding debris in the tank will help maintain consistent pressure over time.
Not sure which carpet extractor suits your workload? Read our upholstery and carpet machine buyer's guide covering 11 models from portable spotters to industrial extractors.
Related articles and links: