CALL US TODAY FOR BEST PRICES, FAST QUOTES AND GREAT DISCOUNTS: 1300 404 226
CALL FOR BEST PRICES: 1300 404 226
Skip to content
Jetwave Cadet G2 Stationary 200-15 High Pressure Cleaner front view

Jetwave Cadet G2 Stationary 200-15 High Pressure Washer

SKU CW3000-15ELG2WM
$7,260.00

Notify me when back in stock

Why Buy From Us

Close

The Jetwave Cadet G2 Stationary 200-15 is a fixed-installation industrial pressure washer built for continuous daily cleaning in one location. It shares the industrial platform of the mobile Cadet G2 — JW Italian triplex pump, 12L bypass cooling tank, 24V safety system — but in a stationary configuration designed to be permanently installed at a wash bay, factory line, or processing plant where the machine stays put and runs hard.

The stationary setup suits operations with a dedicated cleaning station rather than a need to move the machine between jobs. Rated for continuous industrial duty, it's engineered to run all day in a fixed position where downtime isn't an option — the kind of permanent installation a busy factory or processing plant relies on.

Is the Jetwave Cadet G2 Stationary 200-15 Right for Your Setup?

This is a fixed-installation machine — the right choice when you have a permanent wash bay or cleaning station and don't need to wheel the machine around. Its continuous duty cycle and industrial build suit factories, workshops, and processing plants running a dedicated cleaning point all day. If you need to move the machine between different areas or job sites, the mobile Cadet G2 200-15 on a trolley frame is the version to choose instead. This stationary model is for operations with a fixed cleaning location and continuous demand.

Key Features

  • JW Italian triplex plunger pump at 1,450 RPM — the slow-speed industrial pump maintains consistent 200 BAR performance and long service life, so the machine sustains continuous fixed-location operation without wearing out
  • Continuous industrial duty cycle — rated for non-stop operation rather than intermittent use, so the machine runs all day at a dedicated cleaning station without needing rest periods
  • 12L bypass cooling tank — protects the pump from overheating during extended jobs and idle periods, so continuous running doesn't cause the premature wear that heat otherwise causes
  • 5.5kW air-cooled three-phase motor with thermal protection — the industrial motor with soft-coupled design runs dependably under continuous load, so the fixed installation performs reliably shift after shift
  • 24V low-voltage control box with emergency stop — the low-voltage control circuit and accessible emergency stop provide industrial operator safety, so the permanently installed machine is safe for any operator to use
  • Delayed Timer Stop (DTS) — shuts the machine down after inactivity, so wear and energy use are reduced during the gaps between wash cycles
  • Independent adjustable unloader valve with safety valve — gives precise pressure control with over-pressurisation protection, so output is adaptable while the system stays safeguarded
  • Galvanised CNC frame with stainless steel cover — the industrial-grade build withstands the demands of a permanent industrial installation, so the machine lasts in a fixed working environment

Included Accessories

  • 10m non-marking hose — double wire braid with secure M22 couplings
  • JW J5500K low trigger force gun — swivel and lance coupling for comfortable operation
  • Straight stainless steel lance — with insulated grip for operator safety and quick snap couplings
  • Nozzle with protector and tail — for reliable, effective cleaning

Technical Specifications

  • Product Code: CW3000-15ELG2WM
  • Max Pressure: 3,000 PSI (200 BAR)
  • Flow Rate: 15 LPM (900 LPH)
  • Motor: 5.5kW, 3 Phase, 415V, 50Hz
  • Pump RPM: 1,450 RPM
  • Class: A (4,200 Bar/Litres)
  • Duty Cycle: Industrial — continuous operation
  • Cooling: 12L bypass cooling tank
  • Safety: 24V control box with emergency stop, DTS Delayed Timer Stop
  • Chassis: Galvanised CNC frame, powder-coated finish, stainless steel cover
  • Weight: Approximately 120kg

Not Sure Which Configuration to Choose?

If you're deciding between the stationary and mobile Cadet G2, or working out which industrial machine suits your setup, call our team on 1300 404 226 and we'll help you get the right configuration for your operation.

Related articles and links:

Description

The Jetwave Cadet G2 Stationary 200-15 is a fixed-installation industrial pressure washer built for continuous daily cleaning in one location. It shares the industrial platform of the mobile Cadet G2 — JW Italian triplex pump, 12L bypass cooling tank, 24V safety system — but in a stationary configuration designed to be permanently installed at a wash bay, factory line, or processing plant where the machine stays put and runs hard.

The stationary setup suits operations with a dedicated cleaning station rather than a need to move the machine between jobs. Rated for continuous industrial duty, it's engineered to run all day in a fixed position where downtime isn't an option — the kind of permanent installation a busy factory or processing plant relies on.

Is the Jetwave Cadet G2 Stationary 200-15 Right for Your Setup?

This is a fixed-installation machine — the right choice when you have a permanent wash bay or cleaning station and don't need to wheel the machine around. Its continuous duty cycle and industrial build suit factories, workshops, and processing plants running a dedicated cleaning point all day. If you need to move the machine between different areas or job sites, the mobile Cadet G2 200-15 on a trolley frame is the version to choose instead. This stationary model is for operations with a fixed cleaning location and continuous demand.

Key Features

  • JW Italian triplex plunger pump at 1,450 RPM — the slow-speed industrial pump maintains consistent 200 BAR performance and long service life, so the machine sustains continuous fixed-location operation without wearing out
  • Continuous industrial duty cycle — rated for non-stop operation rather than intermittent use, so the machine runs all day at a dedicated cleaning station without needing rest periods
  • 12L bypass cooling tank — protects the pump from overheating during extended jobs and idle periods, so continuous running doesn't cause the premature wear that heat otherwise causes
  • 5.5kW air-cooled three-phase motor with thermal protection — the industrial motor with soft-coupled design runs dependably under continuous load, so the fixed installation performs reliably shift after shift
  • 24V low-voltage control box with emergency stop — the low-voltage control circuit and accessible emergency stop provide industrial operator safety, so the permanently installed machine is safe for any operator to use
  • Delayed Timer Stop (DTS) — shuts the machine down after inactivity, so wear and energy use are reduced during the gaps between wash cycles
  • Independent adjustable unloader valve with safety valve — gives precise pressure control with over-pressurisation protection, so output is adaptable while the system stays safeguarded
  • Galvanised CNC frame with stainless steel cover — the industrial-grade build withstands the demands of a permanent industrial installation, so the machine lasts in a fixed working environment

Included Accessories

  • 10m non-marking hose — double wire braid with secure M22 couplings
  • JW J5500K low trigger force gun — swivel and lance coupling for comfortable operation
  • Straight stainless steel lance — with insulated grip for operator safety and quick snap couplings
  • Nozzle with protector and tail — for reliable, effective cleaning

Technical Specifications

  • Product Code: CW3000-15ELG2WM
  • Max Pressure: 3,000 PSI (200 BAR)
  • Flow Rate: 15 LPM (900 LPH)
  • Motor: 5.5kW, 3 Phase, 415V, 50Hz
  • Pump RPM: 1,450 RPM
  • Class: A (4,200 Bar/Litres)
  • Duty Cycle: Industrial — continuous operation
  • Cooling: 12L bypass cooling tank
  • Safety: 24V control box with emergency stop, DTS Delayed Timer Stop
  • Chassis: Galvanised CNC frame, powder-coated finish, stainless steel cover
  • Weight: Approximately 120kg

Not Sure Which Configuration to Choose?

If you're deciding between the stationary and mobile Cadet G2, or working out which industrial machine suits your setup, call our team on 1300 404 226 and we'll help you get the right configuration for your operation.

Related articles and links:

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.

STORE FAQs

We offer standard shipping across Australia. Orders over $500 receive free standard shipping, subject to our shipping policy regarding bulky items.

We accept returns within 30 days of purchase for unused items in original packaging.

Yes, we offer competitive pricing for bulk orders. Contact our team for a custom quote.

Yes. Save on delivery fee and get in touch with our team to organise collection.

Order processing times may vary based on a number of reasons. However, generally orders are processed within 2 - 4 business days.

Shipping can vary due to the product purchased, the customers location and other factors. However you can expect your product to arrive within 2 - 10 days.

The majority of products have a minimum of 12 months warranty. This can change however from brand to brand. Get in touch with our team to find out more.

As we stock a broad range of products and brands, servicing and repairs can also vary. Get in contact with our team to discuss further.

Yes we do. If you need a spare or replacement part and don't see it on our site, get in touch with our team as we will most likely be able to source it for you.

Aussie Wide Shipping

Fast and competitive

Lifetime Support

Product lifetime support

Spare parts

We source spare parts

Buying in bulk?

Request a quote

Description

The Jetwave Cadet G2 Stationary 200-15 is a fixed-installation industrial pressure washer built for continuous daily cleaning in one location. It shares the industrial platform of the mobile Cadet G2 — JW Italian triplex pump, 12L bypass cooling tank, 24V safety system — but in a stationary configuration designed to be permanently installed at a wash bay, factory line, or processing plant where the machine stays put and runs hard.

The stationary setup suits operations with a dedicated cleaning station rather than a need to move the machine between jobs. Rated for continuous industrial duty, it's engineered to run all day in a fixed position where downtime isn't an option — the kind of permanent installation a busy factory or processing plant relies on.

Is the Jetwave Cadet G2 Stationary 200-15 Right for Your Setup?

This is a fixed-installation machine — the right choice when you have a permanent wash bay or cleaning station and don't need to wheel the machine around. Its continuous duty cycle and industrial build suit factories, workshops, and processing plants running a dedicated cleaning point all day. If you need to move the machine between different areas or job sites, the mobile Cadet G2 200-15 on a trolley frame is the version to choose instead. This stationary model is for operations with a fixed cleaning location and continuous demand.

Key Features

  • JW Italian triplex plunger pump at 1,450 RPM — the slow-speed industrial pump maintains consistent 200 BAR performance and long service life, so the machine sustains continuous fixed-location operation without wearing out
  • Continuous industrial duty cycle — rated for non-stop operation rather than intermittent use, so the machine runs all day at a dedicated cleaning station without needing rest periods
  • 12L bypass cooling tank — protects the pump from overheating during extended jobs and idle periods, so continuous running doesn't cause the premature wear that heat otherwise causes
  • 5.5kW air-cooled three-phase motor with thermal protection — the industrial motor with soft-coupled design runs dependably under continuous load, so the fixed installation performs reliably shift after shift
  • 24V low-voltage control box with emergency stop — the low-voltage control circuit and accessible emergency stop provide industrial operator safety, so the permanently installed machine is safe for any operator to use
  • Delayed Timer Stop (DTS) — shuts the machine down after inactivity, so wear and energy use are reduced during the gaps between wash cycles
  • Independent adjustable unloader valve with safety valve — gives precise pressure control with over-pressurisation protection, so output is adaptable while the system stays safeguarded
  • Galvanised CNC frame with stainless steel cover — the industrial-grade build withstands the demands of a permanent industrial installation, so the machine lasts in a fixed working environment

Included Accessories

  • 10m non-marking hose — double wire braid with secure M22 couplings
  • JW J5500K low trigger force gun — swivel and lance coupling for comfortable operation
  • Straight stainless steel lance — with insulated grip for operator safety and quick snap couplings
  • Nozzle with protector and tail — for reliable, effective cleaning

Technical Specifications

  • Product Code: CW3000-15ELG2WM
  • Max Pressure: 3,000 PSI (200 BAR)
  • Flow Rate: 15 LPM (900 LPH)
  • Motor: 5.5kW, 3 Phase, 415V, 50Hz
  • Pump RPM: 1,450 RPM
  • Class: A (4,200 Bar/Litres)
  • Duty Cycle: Industrial — continuous operation
  • Cooling: 12L bypass cooling tank
  • Safety: 24V control box with emergency stop, DTS Delayed Timer Stop
  • Chassis: Galvanised CNC frame, powder-coated finish, stainless steel cover
  • Weight: Approximately 120kg

Not Sure Which Configuration to Choose?

If you're deciding between the stationary and mobile Cadet G2, or working out which industrial machine suits your setup, call our team on 1300 404 226 and we'll help you get the right configuration for your operation.

Related articles and links:

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.