Need help choosing the right equipment? Call 1300 404 226
Need help choosing? Call 1300 404 226
Skip to content
Delfin MTL 801 WD EX ATEX wet and dry industrial vacuum front view

Delfin MTL 801 WD EX ATEX Wet and Dry Industrial Vacuum

SKU MTL801WDZ22-001
$6,780.40

Notify me when back in stock

Enter your postcode for a freight cost

Collect combustible dust and non-flammable liquids with one ATEX machine

The Delfin MTL 801 WD EX is a single phase industrial vacuum for classified areas where you need to collect both combustible dust and non-flammable liquids. The powerhead is Ex tb dust tight rated to IP64, the accessories and non-metallic parts are tested for anti-spark and static dissipative performance, and the 80 litre tank is AISI 304 stainless steel. It is marked for Zone 22 outside and Zone 20 inside.

What each feature does for your site

  • Ex tb dust tight powerhead, IP64 — the motor head is certified for combustible dust atmospheres, so the machine can run in the area rather than outside it.
  • Anti-spark, static dissipative accessories and non-metallic parts — these parts are tested for ignition risk, so hoses and tools do not become a source of static discharge.
  • Internal Zone 20 protection (Da) — the inside of the machine is built for the dust cloud that forms in the tank and filter, so the collected material is contained safely.
  • Wet and dry operation with a polypropylene filter for liquids — one machine switches between dust and liquid collection, so you do not need two units for spills and dust.
  • Antistatic Class M polyester bag filter plus a standard H14 absolute filter — fine dust is held through two filter stages at 99.995% efficiency (MPPS, EN 1822-5), so less dust returns to the workplace air.
  • 80 litre AISI 304 stainless steel tank — a large, non-combustible, easy-to-clean tank, so you empty less often and clean down easily between materials.
  • 80 mm suction inlet — a wide inlet takes larger hoses and tools, so material moves quickly with less blockage.

Technical specifications

  • Marking: II 1/3D Ex h tb IIIC T80°C (internal) / T95°C (external) Da/Dc
  • Hazardous location: Zone 20 internal, Zone 22 external (Category 1/3D)
  • Voltage: 230 V, 50/60 Hz, single phase
  • Power / current: 1.1 kW / 8 A
  • Max vacuum: 2,500 mmH₂O
  • Max airflow: 180 m³/h
  • Suction inlet: 80 mm
  • Capacity: 80 litres, AISI 304 stainless steel
  • Primary filter: bag, polyester antistatic Class M (IEC 60335-2-69), 5,000 cm², 420 mm diameter
  • H14 absolute filter: standard, 11,000 cm², 99.995% on the MPPS method (EN 1822-5)
  • Noise level: 74 dB(A) (EN ISO 3744)
  • Dimensions: 55 x 63 x 126 cm
  • Weight: 42 kg
  • Accessories: accessory kit included

High reach cleaning in the same zone

Dust settles on beams, ducting and rafters as well as the floor. A certified high reach kit such as the SpaceVac 50 mm ATEX Pro kit or the SpaceVac ATEX Pro kit lets crews clean overhead surfaces from the ground. This machine has an 80 mm inlet, so contact us and we will confirm the correct adaptor before you order.

Who it suits

Sites with a Zone 22 classification that generate both combustible dust and non-flammable liquid spills, such as food and beverage, chemical, pharmaceutical and manufacturing plants. For dry dust only in a smaller unit, see the Delfin MTL 301 EX.

Frequently asked questions

Is it certified for Zone 21?

No. The MTL 801 WD EX is marked for Zone 22 outside the machine. For Zone 21, see the MTL 201 EX, MTL 301 EX, MTL 451 EX or DM2 EL EX.

What does the 1/3D marking mean?

The first number is the protection category for the inside of the machine and the second is for the outside. 1/3D means Zone 20 inside and Zone 22 outside. The D means dust.

Can it collect flammable liquids?

No. Delfin's ATEX liquid collection is for non-flammable liquids only. Do not use it to collect flammable liquids or solvents.

What dust can it collect?

The dry type is for non-reactive combustible dust such as flour, sugar, wood and plastics dust. It is not for reactive or self-igniting dusts such as aluminium or titanium. Contact us if that is your dust.

Does it include an H14 filter?

Yes. An 11,000 cm² H14 absolute filter is standard, in addition to the antistatic Class M bag filter.

How much does freight cost?

At 42 kg this machine ships as freight. Send us your delivery postcode and we will quote it.

Description

Collect combustible dust and non-flammable liquids with one ATEX machine

The Delfin MTL 801 WD EX is a single phase industrial vacuum for classified areas where you need to collect both combustible dust and non-flammable liquids. The powerhead is Ex tb dust tight rated to IP64, the accessories and non-metallic parts are tested for anti-spark and static dissipative performance, and the 80 litre tank is AISI 304 stainless steel. It is marked for Zone 22 outside and Zone 20 inside.

What each feature does for your site

  • Ex tb dust tight powerhead, IP64 — the motor head is certified for combustible dust atmospheres, so the machine can run in the area rather than outside it.
  • Anti-spark, static dissipative accessories and non-metallic parts — these parts are tested for ignition risk, so hoses and tools do not become a source of static discharge.
  • Internal Zone 20 protection (Da) — the inside of the machine is built for the dust cloud that forms in the tank and filter, so the collected material is contained safely.
  • Wet and dry operation with a polypropylene filter for liquids — one machine switches between dust and liquid collection, so you do not need two units for spills and dust.
  • Antistatic Class M polyester bag filter plus a standard H14 absolute filter — fine dust is held through two filter stages at 99.995% efficiency (MPPS, EN 1822-5), so less dust returns to the workplace air.
  • 80 litre AISI 304 stainless steel tank — a large, non-combustible, easy-to-clean tank, so you empty less often and clean down easily between materials.
  • 80 mm suction inlet — a wide inlet takes larger hoses and tools, so material moves quickly with less blockage.

Technical specifications

  • Marking: II 1/3D Ex h tb IIIC T80°C (internal) / T95°C (external) Da/Dc
  • Hazardous location: Zone 20 internal, Zone 22 external (Category 1/3D)
  • Voltage: 230 V, 50/60 Hz, single phase
  • Power / current: 1.1 kW / 8 A
  • Max vacuum: 2,500 mmH₂O
  • Max airflow: 180 m³/h
  • Suction inlet: 80 mm
  • Capacity: 80 litres, AISI 304 stainless steel
  • Primary filter: bag, polyester antistatic Class M (IEC 60335-2-69), 5,000 cm², 420 mm diameter
  • H14 absolute filter: standard, 11,000 cm², 99.995% on the MPPS method (EN 1822-5)
  • Noise level: 74 dB(A) (EN ISO 3744)
  • Dimensions: 55 x 63 x 126 cm
  • Weight: 42 kg
  • Accessories: accessory kit included

High reach cleaning in the same zone

Dust settles on beams, ducting and rafters as well as the floor. A certified high reach kit such as the SpaceVac 50 mm ATEX Pro kit or the SpaceVac ATEX Pro kit lets crews clean overhead surfaces from the ground. This machine has an 80 mm inlet, so contact us and we will confirm the correct adaptor before you order.

Who it suits

Sites with a Zone 22 classification that generate both combustible dust and non-flammable liquid spills, such as food and beverage, chemical, pharmaceutical and manufacturing plants. For dry dust only in a smaller unit, see the Delfin MTL 301 EX.

Frequently asked questions

Is it certified for Zone 21?

No. The MTL 801 WD EX is marked for Zone 22 outside the machine. For Zone 21, see the MTL 201 EX, MTL 301 EX, MTL 451 EX or DM2 EL EX.

What does the 1/3D marking mean?

The first number is the protection category for the inside of the machine and the second is for the outside. 1/3D means Zone 20 inside and Zone 22 outside. The D means dust.

Can it collect flammable liquids?

No. Delfin's ATEX liquid collection is for non-flammable liquids only. Do not use it to collect flammable liquids or solvents.

What dust can it collect?

The dry type is for non-reactive combustible dust such as flour, sugar, wood and plastics dust. It is not for reactive or self-igniting dusts such as aluminium or titanium. Contact us if that is your dust.

Does it include an H14 filter?

Yes. An 11,000 cm² H14 absolute filter is standard, in addition to the antistatic Class M bag filter.

How much does freight cost?

At 42 kg this machine ships as freight. Send us your delivery postcode and we will quote it.

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.

STORE FAQs

Shipping prices can be viewed on each individual product page using our shipping quote calculator otherwise at checkout. 

We accept returns within 30 days of purchase for unused items in original packaging.

Yes, we offer competitive pricing for bulk orders. Contact our team for a custom quote.

Yes. Save on delivery fee and get in touch with our team to organise collection. 

Order processing times may vary based on a number of reasons. However, generally orders are processed within 2 - 4 business days. 

Shipping can vary due to the product purchased, the customers location and other factors. However you can expect your product to arrive within 2 - 10 days.

The majority of products have a minimum of 12 months warranty. This can change however from brand to brand. Get in touch with our team to find out more. 

As we stock a broad range of products and brands, servicing and repairs can also vary. Get in contact with our team to discuss further. 

Yes we do. If you need a spare or replacement part and don't see it on our site, get in touch with our team as we will most likely be able to source it for you.

Aussie Wide Shipping

Fast and competitive

Lifetime Support

Product lifetime support

Spare parts

We source spare parts

Buying in bulk?

Request a quote

Description

Collect combustible dust and non-flammable liquids with one ATEX machine

The Delfin MTL 801 WD EX is a single phase industrial vacuum for classified areas where you need to collect both combustible dust and non-flammable liquids. The powerhead is Ex tb dust tight rated to IP64, the accessories and non-metallic parts are tested for anti-spark and static dissipative performance, and the 80 litre tank is AISI 304 stainless steel. It is marked for Zone 22 outside and Zone 20 inside.

What each feature does for your site

  • Ex tb dust tight powerhead, IP64 — the motor head is certified for combustible dust atmospheres, so the machine can run in the area rather than outside it.
  • Anti-spark, static dissipative accessories and non-metallic parts — these parts are tested for ignition risk, so hoses and tools do not become a source of static discharge.
  • Internal Zone 20 protection (Da) — the inside of the machine is built for the dust cloud that forms in the tank and filter, so the collected material is contained safely.
  • Wet and dry operation with a polypropylene filter for liquids — one machine switches between dust and liquid collection, so you do not need two units for spills and dust.
  • Antistatic Class M polyester bag filter plus a standard H14 absolute filter — fine dust is held through two filter stages at 99.995% efficiency (MPPS, EN 1822-5), so less dust returns to the workplace air.
  • 80 litre AISI 304 stainless steel tank — a large, non-combustible, easy-to-clean tank, so you empty less often and clean down easily between materials.
  • 80 mm suction inlet — a wide inlet takes larger hoses and tools, so material moves quickly with less blockage.

Technical specifications

  • Marking: II 1/3D Ex h tb IIIC T80°C (internal) / T95°C (external) Da/Dc
  • Hazardous location: Zone 20 internal, Zone 22 external (Category 1/3D)
  • Voltage: 230 V, 50/60 Hz, single phase
  • Power / current: 1.1 kW / 8 A
  • Max vacuum: 2,500 mmH₂O
  • Max airflow: 180 m³/h
  • Suction inlet: 80 mm
  • Capacity: 80 litres, AISI 304 stainless steel
  • Primary filter: bag, polyester antistatic Class M (IEC 60335-2-69), 5,000 cm², 420 mm diameter
  • H14 absolute filter: standard, 11,000 cm², 99.995% on the MPPS method (EN 1822-5)
  • Noise level: 74 dB(A) (EN ISO 3744)
  • Dimensions: 55 x 63 x 126 cm
  • Weight: 42 kg
  • Accessories: accessory kit included

High reach cleaning in the same zone

Dust settles on beams, ducting and rafters as well as the floor. A certified high reach kit such as the SpaceVac 50 mm ATEX Pro kit or the SpaceVac ATEX Pro kit lets crews clean overhead surfaces from the ground. This machine has an 80 mm inlet, so contact us and we will confirm the correct adaptor before you order.

Who it suits

Sites with a Zone 22 classification that generate both combustible dust and non-flammable liquid spills, such as food and beverage, chemical, pharmaceutical and manufacturing plants. For dry dust only in a smaller unit, see the Delfin MTL 301 EX.

Frequently asked questions

Is it certified for Zone 21?

No. The MTL 801 WD EX is marked for Zone 22 outside the machine. For Zone 21, see the MTL 201 EX, MTL 301 EX, MTL 451 EX or DM2 EL EX.

What does the 1/3D marking mean?

The first number is the protection category for the inside of the machine and the second is for the outside. 1/3D means Zone 20 inside and Zone 22 outside. The D means dust.

Can it collect flammable liquids?

No. Delfin's ATEX liquid collection is for non-flammable liquids only. Do not use it to collect flammable liquids or solvents.

What dust can it collect?

The dry type is for non-reactive combustible dust such as flour, sugar, wood and plastics dust. It is not for reactive or self-igniting dusts such as aluminium or titanium. Contact us if that is your dust.

Does it include an H14 filter?

Yes. An 11,000 cm² H14 absolute filter is standard, in addition to the antistatic Class M bag filter.

How much does freight cost?

At 42 kg this machine ships as freight. Send us your delivery postcode and we will quote it.

Shipping

Orders are subject to flat rate shipping fees starting from $24.99. Shipping costs may vary depending on the size and weight of the items purchased, as well as the delivery location.

All applicable shipping fees will be clearly displayed at checkout during the order process, so you can review them before completing your purchase.

If you see something that you think is wrong, please let us know. 

You may think that some shipping fees are high, but just remember — most of the time your product is delivered by a real person, driving a real truck, often giving up a large portion of their day to make sure it arrives safely.

Behind every delivery is someone lifting, loading, navigating traffic, and taking care to ensure your order gets to you in perfect condition. We value their hard work just as much as we value your support, so we truly appreciate your understanding when it comes to freight costs.

Please keep in mind that these shipping prices are applicable for metro areas of Australia (VIC, NSW, SA) and some orders in remote areas (NT, WA, QLD, TAS) may also be subject to higher shipping fees. This will be communicated with the customer prior to shipment and confirmation of the order. 

Some large bulky orders may require freight and this could be an additional cost and will be communicated with the customer prior to shipment. 

Feel free to contact our team on 1300 404 226 or email at sales@ozcleaninggear.com.au for more information. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Please allow 2 - 4 business days (Monday to Friday) for handling/processing times and 1 - 7 days for shipping depending on your location. Sometimes this time may vary due to a number of reasons however the common 

Orders are processed on business days (Monday to Friday). Please note that processing and shipping times may vary during weekends and public holidays. We do our best to get your order out as quickly as possible, and appreciate your patience during these periods.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@ozcleaninggear.com.au.

Shipping times may vary depending on each case by case. Please allow up to 4 days for product handling time and up to 7 days for receiving your product from being shipped. 

International Orders:

Please be aware that our products are made specifically for the Australian market. This means that they require a 240v electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Delivery & Responsibility After Delivery

Once an order has been delivered to the shipping address provided at checkout, Oz Cleaning Gear is no longer responsible for any loss, theft, or damage that may occur after delivery. If the courier confirms that the order has been delivered (including where an order has been left in a safe location as per the courier’s discretion), ownership and responsibility pass to the customer.

Customers may add special delivery instructions (e.g., “please leave at back door” or “signature required”) at the time of placing the order. If you request “Signature on Delivery” and are not available to sign, re-delivery or redirection fees may apply, and these costs will be the responsibility of the customer.

We recommend choosing the delivery option that best suits your needs to ensure safe receipt of your order.

While we always do our best to honour delivery instructions provided at checkout, there may be occasions where these notes are unintentionally missed by the delivery driver.

We work with real people who are doing their best each day, and from time to time things can be overlooked. We appreciate your understanding and patience should this occur.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@ozcleaninggear.com.au, then visit our Returns page and lodge your return claim online.